Dewinter Optical Inc

Automatic and Interactive Image Analysis Software for Brinell-Vicker-knoop Macro and Microhardness Test.

Hardness Pro is designed for operation under windows 8 and windows 10 and can interface with office spreadsheet application.
Navigation within Hardness Pro Software is made easy by its clean design and is supported by simple intuitive gestures. Designed for touch panel use. APso with an entirely new look and feel.

The Software is simple but high definition testing provides accurate, reproducible test results in the macro and micro ranges.

Features:

• Automatic or Interactive.
• Manual measurement mode on live image or acquired image.
• Automatic calculation of the best circumference that minimizes the average quadratic error with the 90 points found.
• Image acquisition in high resolution multi document environment with 64-bit Colors with all operating systems like windows 8 and windows 10.
• In the event, that the automatic measurement fails, will offered the possibility to manually measure through the acquisition of three points in Brinell, D1 and D2 in Vicker and Simple L in Knoop.
• Accuracy of the measured data us up to 0.001um.
• Multifield study is available.
• The Software meets all requirements to ASTM E 384, ISO 6507 and ISO 4545.
• Improvement in Image processing performance has improved the indentation measurement of function.
• Case Hardness depth (CHD) measurement is automatic.

A common application of hardness testing is the evaluation of the hardness depth of the Surface-hardened steel. This is done by performing a series of hardness impression from the edge of the cross sectioned sample toward the center. The hardness progression is plotted on a graph, and the distance from the surface to the so-called Hardness Limit (HL) is calculated.

Weld check software is a powerful easy- to-use tool that enhances your ability to quickly and efficiently handle your most critical welding measurement and documentation software needs. Your workflow and productivity are greatly improved. Weld Check has been designed with your welding cross- section measurement needs in mind. Weld Checks measurement module allows you to quickly measure such items as your fillet welds, throat, leg lengths and penetration.

Use Weld Check Measurement Tolerance indicator to improve performance by having the software automatically tell you if a measurement is out of the tolerance range.

The following report concerns the analysis of a fillet weld, a weld of approximately triangular cross section joining two surfaces at approximately right angle to each other.
Important measurements made by the distance from the root if the fillet to the center of the face (or throat), the distance from the root of the joint to the junction between the exposed surface of the weld and the base metal (or leg), the angles and the root penetration. Measurements that could have been done with the same ease or similar sample are among others: depth of HAZ (heat affected zone), area of HAZ, joint penetration, phase counting, etc.

The measurement remains unaffected if the image is zoomed for better accuracy. The magnifier tool is also available which can be switched on any part of image. The tool zooms only the region surrounding the cursor allowing increase the drawing precision while still seeing the whole sample.

Image analysis system cab measure a sequence of specific characteristics or welded parts. The system brings the good tool with the good color when itthe time for the operator to use it.

Features

• To-The-Point measurement systems, offering is needed and expected by QC-FA welding professionals; ensuring quick and reliable measurement with 100% accuracy and reproducibility.
• Important measurement includes distance from the root of the fillet (throat), the distance from the root of the joint to junction between exposed surface of the weld (leg), the angle, root peneration and penetration percentage.
• For similar type of measurement other tools are available to calculate angles, circle or arc radius, area etc.
• Different line from throat leg, Penetration, thickness and Angles acquire automatically different colors.
• The results are express in report generator module with original image, lines in different colors, results in tabulated form.
• The results can be expressed based on a specific standard using the Report tool module. This also allows to obtain a passed/failed automatic decision based on predefined acceptance criterion.
• The measurement remain unaffected if the image is zoomed for better accuracy. The magnifier tool is also available which can be switched on any part of image.

MetaPlus is a modular quantitative image analysis software specific to steel industries. Simply select the appropriate analysis module and follow the intuitive guidance of built-in wizard. Incorporates industry standards including EN ISO 643, ASTM E-112, ASTM E 930-92, ASTM 13 82-91. For analysis, sample is ground, polished and it necessary, etched using a suitable medium.

Sieve has rectangular or round mesh openings. This module has automatic measurements based on edge detection in image processing. The sieve measurement parameters are; Aperture size and wire diameter & pitch. Measurements are done to NIST traceable standards. Test sieve can be supplied according to ASTME-11-20 or ISO 3310 Specifications. Reporting is presented graphically in a Histogram. It also included statistical summary information. Automation reduces approximately 92% of the time spent on the Calibration process, when compared to traditional methods, with better accuracy.

This module is related to inspection of appearance and profile measurement of DIODE for automobile, robot & Computer industries. The Software is one button automatic profile measurements based on edge detection using image processing algorithms. It plays an important role in making pass/fail Judgments (with min/max acceptance range decided by user anytime) whether DIODE is manufactured according to specifications. It can be further customized as per customer requirements for extra charges as per mutually agreed terms.

Manual, Auto bright and Auto dark methods to identity intensity range defined object to be measured. Various calculation & measurements available for selected Particle are; Dimensions, Area, Perimeter, Ferrite Length, Min/Max Radius, Thread Length, Thread Width, Fiber Length, Fiber Width.

The use of microscopic image analysis system is the most reliable technique to characterize particle shape and to characterize a particle size and volume distribution. Tradition method, such as laser diffraction, although efficient, gives limited information on particle shape. The particle size, distribution and shape of the particles can effect bulk properties, product performance, process ability, stability and appearance of the end product in Pharma industry.

The software is useful to measure and analyse the particle size, particles shape, particle count, foreign particle detection, particle structure, homogeneity, surface, coatings thickness. For spherical particles (which are rarely uncounted in pharmaceutical powders) the diameters are sufficient to describe the particle size. For non- spherical particles, feret’s diameter, Particle orientation, Particle shape, elongation, convexity, circularity, circle equivalent diameter are measured.

This software is also useful to study the polarizing effects which study the cross section through pharmaceutical tablets by preparing thin-sections on slide with UV curing adhesive for final polishing. The cross section reveal the spatial distribution of components in the tablets so that any post compression change (eg polymorph conversions or change in the hydration state of components) can be investigated.

Microscopic size and shape analysis of particles can be performed by using powerful “Pharma Pro” Image Analyse software. Thousands of Particles are automatically being detected & analysed in a matter of few seconds. Measurement methods are easily set-up in advance and performed using intuitive software wizard features, easily following the required operating procedures. Access to system configuration, calibration and measurement set-up are managed ensuring “FDA 21 CFR Part 11” compliancy. Results are displayed in both graphical and tabular format, stastical parameters and comparisons for particle size and shape Manufacturing are calculated.Need for particle size control in the manufacture of Pharmaceutical industry attempts to capitalize on some with less than ideal solubility profiles. The interest in particle size measurements will remain high, particularly in view of FDA trends toward recommending more through descriptions of particle size distributions in submissions in which the emphasis of a drug product claim is based in tightly controlled particle size. Microscopes and digital image Analyse can be used for: •Determination of particle size distribution.•Particle shape e.g. aspect ratio (ratio between breath and length) which gives valuable extra information.•Overview of particles dispersed in liquid or air.•Observation of foreign particles in the sample (pollution).•Measurement of object sizes e.g. mesh size of sieves.

Sperm Pro is CASA (Computer assisted semen analysis) software suitable for human sperm. This software analyse accurate, repetitive and automatic assessment of following sperm Parameters: Motility, Concentration, Morphology, DNA Fragmentation & Vitality.“Sperm Pro” follows WHO Laboratory manual. Suitable for hospitals, fertility clinics and Labs to evaluate cases of male infertility and other practices. Most of analysis are done with single button click. Results are displayed in few seconds. Reduce the operational cost by using reusable counting chamber. Measurement result can be printed with patient’s details, graphs, measurement images.

Specifications

• This Software useful for micro measurement of fiber, yarn, threads, textile material, non-woven fabrics etc.
• The real full screen display of image, acquision, annotation, enhancement with hundred of filters, measurements, statistical processing of measured data are few of the capability of Textile Pro.
• Photographs of all fibers view are pre-loaded in the software to identify fibers without prior knowledge in the same. The library can be created & retrieved within the same program.
• Micro analysis of yarns and fiber sections.
• Measurements of length, surfaces, perimeters, angels, distance between two points or lines or objects.
• Fast and easy way the fitness analysis of single fiber.
• Check the purchased material can be identify the type of fiber, comparing it with the fiber pictures stored in the data bank with the longitudinal and the sectional views.
• Check and measures the quality and shape of Lycra or synthetic multifilament single threads.
• Analyze the compactness of non-woven fabrics.
• Analyze the Yarn structure and detect possible defects.
• Detect, identify and measure possible impurities contained in textile materials.
• Analyze the compactness of no-woven fabrics.
• Measure section surface and perimeters.
• Analyze mechanical part like needle points spinnerets etc.
• Macro analysis of a yarn section.
• Reduce the fabric warp and weft density to a cm or inch.

Image Editing
1. Cut, Copy, and Paste.
2. Selected copy by free hand AOL controlled by four arrow keys available on keyboard or mouse with zoom preview.
3. Crop, duplicate, restore
4. Resize
5. Compression
6. Conversion to other format BMP, JPG, TIF, PNG, GIF & PSD
7. Flood fill or spray with selected color at selected portion.
8. Grid creation; 5X5, 10X10 & 100X100 lines.
9. Drawing tool curve, line, square, and circle with node control and provision to change color & thickness of the line.
10. Write text in any color or font.
11. Pointer to place on an object in four directions with provision to change its color & thickness.
12. Eraser works only on line, arrow or on any drawing tool.(not on original image)
13. Camera Lucida
14. Montage feature to merge stored image together. Useful to Merge different focuses of same image. 
15. Image stitching.
16. Highlighter.
17. Pixel by Pixel Correction by key board.
18. Multiple image folder with Search facility.
19. Filter application on selected area

View
1. Zoom in/out
2. Zoomed preview
3. Rotation at 90, 180,270 or custom
4. Image flipping; horizontal or vertical axis
5. Intensity histogram.
6. Image Information
7. Redo/Undo on all operations.
8. Ruler in Various units.
9. Slide show.

Image Processing
1. Background subtraction and contrast enhancement of color or monochrome images
2. Arithmatic image functions (Boolean Math; Add, AND, OR, XOR, DIFF, MIN, MAX, +, -, /, *, And Simple).

Routine Filters:
Invert, Brightness, Contrast, Hue, Saturation, Blur, Noise Remove, Emboss, Engrave, Gamma R, Gamma G, Gamma B, Yellow, Magenta, Cyan, Mosaic, Smooth, Desaturation, Pseudo Color, Colorize, Oilify, Despeckle, Postarize.

Special Filter and Karnels:
High Boost, High Spatial, Low Pass Spatial, Ranking (Max, Med, Min), Point detection, Line detection, Homogeneity

Edge Detection
Laplacing, Sobel, Kirsch, Prewitt Gradient, Shift & Difference, Combine, Contrast Base, Quick, Range And Variance.

Morphometery
Skelotizing, Pruning, SKIZ, Histogram Equalization, Histogram Smoothing, Histogram Peak, Histogram Valley, Segmentation by Over/Under and Quantized, Contouring, Dilation / Erosion on Binary, Gray & colored Images, Opening/ Closing on Gray & Binary Images, Special Opening/Closing, Split/Combine Of RGB, YUV, YIQ, XYZ, & HSL, Changing any Image to 1, 4, 8 & 24 Bits, Medial Axis. Transformation, Halftone. Image Addition, Image Average, Image Subtraction, Image Multiplication.

Report
a) Three options: Direct printout with original image processed Image & Tabular results 
b) Export to MS Office or Excel for further modification.

Metalite is a modular quantitative image analysis software specific to steel industries. Simply select the appropriate analysis module and follow the intuitive guidance of built-in wizard. Incorporates industry standards including EN ISO 643, ASTM E-112, ASTM E 930-92, ASTM 13 82-91. For analysis, sample is ground, polished and it necessary, etched using a suitable medium.

Dewinter’s software designed for industrial materials, Scientists, Metallurgists, Laboratory technicians, and R & D engineers who need improved solutions for quality control and product development.  Aluminium Pro is computer-aided quantitative analysis results follows strictly ISO & ASTM technical standards.The software is powerful to handle different image format BMP, TIFF, GIF, JPEG etc. It support many cameras,                USB 2.0 & USB 3.0, devices, TWAIN  input devices.This exceptional software produces as much as 80% more picture points in image window than competitive softwares.The image processing technique will streamline image capture, measurement and enhancement, while improving  the accuracy of your results. Live measurement saves lot of your time.

Brinell Pro is portable System to automatically measure and determine the Brinell Hardness value. Brinell microscope allowing quick, automatic, and accurate reading with no operator influence on the measurement.

The magnified indentation on the screen also permits detection of any defect in the surface finish or the indentation.

Features:

• Dewinter Brinell Microscope has magnification up to 200X.
• The Microscope is equipped with LED lamp.
• The base is provided with small magnets to have better grip on Indent.
• Focusing knob is available on Microscope. (Optional auto focusable Microscope is also available).
• One button automatic measure indentation.
• Live measurement is available.
• In the event, that the automatic measurement fails, will be offered the possibility to manually measure through the acquisition of three points.
• Puts the position in archive mode.
• Accuracy of the measured diameter is up to 0.001
• Automatic storage of images and accompanying measurement data files.
• Storage of operator ID, data/hour, hardness parameters, measured hardness values, Location of stored image
• The Brinell Microscope is connected to PC to the USB port.

The method, also referred to as a Microhardness Test Method, is mostly used in the small parts, thin sections, or case depth work. The Vickers Software follows ASTME-384. The Vicker Microhardness methods are used to test on metals, ceramics, composites, etc. When the mean diagonal of the indentation has been determined the Vickers hardness may be calculated from the formula by Software. Case Hardness Depth (CHD) measurement is automatic. A common application of hardness testing is the evaluation of the hardness depth of Surface-hardened steels. This is done by performing a series of hardness impressions from the edge of the cross-sectioned sample toward the center. The hardness progression is plotted on a graph, and the distance from the Surface to the so-called hardness limit (HL) is calculated.

Features:

• The high-definition testing provides accurate, repeatable, and reproducible test results in the macro and micro ranges.
• The Software meets all requirements to ASTM E384, ISO 6507 and ISO 4545.
• Automatic Vicker measurement available. Improvement in image-processing performance has improved the indentation measurement function.
• Vicker Pro is designed for operation under windows 8 and windows 10 and can be interface with office spreadsheet application.
• Navigation within Vicker Pro Software is made easy by its clean design and is supported by simple intuitive gestures.
• Designed for touch panel use with an entirely new look and feel.
• Automatic or Interactive manual measurement mode on live image or acquired image.
• Image is acquired in high resolution in Multi document environment with 64 bit colours.
• In the event, that the automatic measurement fails, will offered the possibility to manually measure through the acquision of D1 and D2.
• The Software meets all requirements to ASTM E-384, ISO 6507 and ISO4545.
• Improvement in Image processing performance has improved the indentation measurement function.

HemaPlus : Introduction
HemaPlus is World’s most Economical one of its kind Microscope based Hematology Analyzer with WBC differential, RBC and Platelet estimation .
It is an inbuilt microscope with AI integrated software system to provide accurate blood result as per standards.
This technology is based on Peripheral Blood Smear Examination where original 100X Objective lens is used for WBC Differential count and Classification.
The WBC, RBC and Platelet reporting is done based on AI and morphological based algorithms based on dataset. 
The captured WBCs are automatically pre flagged into different differential types which the user can verify, edit and revise before final reporting.
The report data can be uploaded to cloud reporting and shared easily for Tele-Reporting and Tele-Pathology usage.
Salient Features of HemaPlus
● Fast and accurate scan of the peripheral smear images.
● Accurate detection of WBC location on smear slide.
● Capture of individual WBC images at true 100X objective with proper mapping of their location on the slide image.
● Automatic counting and classification of WBC Differential.
● Captured WBCs are automatically flagged into Differential types which can be further modified if required.

Image Editing

• Cut, Copy, and Paste.
• Selected copy by free hand AOL controlled by four arrow keys available on keyboard or mouse with zoom preview.
• Crop, duplicate, restore
• Resize
• Compression
• Conversion to other format BMP, JPG, TIF, PNG, GIF & PSD
• Flood fill or spray with selected color at selected portion.
• Grid creation; 5X5, 10X10 & 100X100 lines.
• Drawing tool curve, line, square, and circle with node control and provision to change color & thickness of the line.
• Write text in any color or font.
• Pointer to place on an object in four directions with provision to change its color & thickness.
• Eraser works only on line, arrow or on any drawing tool.(not on original image)
• Camera Lucida
• Montage feature to merge stored image together. Useful to Merge different focuses of same image.
• Image stitching.
• Highlighter.
• Pixel by Pixel Correction by key board.
• Multiple image folder with Search facility.
• Filter application on selected area.

View:

• Zoom in/out
• Zoomed preview
• Rotation at 90, 180,270 or custom
• Image flipping; horizontal or vertical axis
• Intensity histogram.
• Image Information
• Redo/Undo on all operations.
• Ruler in Various units.
• Slide show.

Image Processing:

• Background subtraction and contrast enhancement of color or monochrome images
• Arithmatic image functions (Boolean Math; Add, AND, OR, XOR, DIFF, MIN, MAX, +, -, /, *, And Simple).

Routin Filter:
Invert, Brightness, Contrast, Hue, Saturation, Blur, Noise Remove, Emboss, Engrave, Gamma R, Gamma G, Gamma B, Yellow, Magenta, Cyan, Mosaic, Smooth, Desaturation, Pseudo Color, Colorize, Oilify, Despeckle, Postarize.

Special Filters & Karnels:High Boost, High Spatial, Low Pass Spatial, Ranking (Max, Med, Min), Point detection, Line detection, Homogeneity


Edge Detection:Laplacing, Sobel, Kirsch, Prewitt Gradient, Shift & Difference, Combine, Contrast Base, Quick, Range And Variance.

Morphometery:
Skelotizing, Pruning, SKIZ, Histogram Equalization, Histogram Smoothing, Histogram Peak, Histogram Valley, Segmentation by Over/Under and Quantized, Contouring, Dilation / Erosion on Binary, Gray & colored Images, Opening/ Closing on Gray & Binary Images, Special Opening/Closing, Split/Combine Of RGB, YUV, YIQ, XYZ, & HSL, Changing any Image to 1, 4, 8 & 24 Bits, Medial Axis. Transformation, Halftone.
Image Addition, Image Average, Image Subtraction, Image Multiplication.

Measurement
a) Spartial calibration
b) Line measurements for Distance, Length, Width, Perimeter, Angle, Three Point Radius.
c) Area by enclosed line controlled by four arrow keys available on keyboard arrows with zoomed preview.

Report:
a) Three options: Direct printout with original image processed Image & Tabular results 
b) Export to MS Office or Excel for further modification.

Application Program are set in the simplest way without compromising accuracy so that inexperienced operator can also make analysis with a minimum of training. Our current portfolio of metallurgy solutions are Nodules analysis, Coating Thickness Measurement, Depth of Width Measurement of Decarburization, Phase percentage with display by colored overlays, Grain Size No., Porosity Analysis, Graphite Flakes Measurement, Non-Metallic Inclusion Rating, Particle Size and Volume Percentage with lot make software complete. Generated reports can be saved or printed with images, Histogram, Data Overlays colors and various other related information.

Image Editing/View

• Cut, Copy, and Paste.
• Selected copy by free hand AOL controlled by four arrow keys available on keyboard or mouse with zoom preview.
• Crop, duplicate, restore
• Resize
• Compression
• Conversion to other format BMP, JPG, TIF, PNG, GIF & PSD
• Flood fill or spray with selected color at selected portion.
• Grid creation; 5X5, 10X10 & 100X100 grids (or cells).
• Drawing tool curve, line, square, and circle with node control and provision to change color & thickness of the line.
• Write text in any color or font.
• Pointer to place on an object in either of four directions with provision to change its color & thickness.
• Eraser works only on line, arrow or on any drawing tool.(not on original image)
• Camera Lucida
• Montage feature to merge stored image together. Useful to Merge different focuses of same image.
• Zoom in/out
• Zoomed preview
• Rotation at 90, 180,270 or custom
• Image flipping; horizontal or vertical axis
• Intensity histogram.
• Image Information
• Redo/Undo on all operations.

Image Processing

• Background subtraction and contrast enhancement of color or grayscale images
• Arithmatic image functions (Boolean Math; Add, AND, OR, XOR, DIFF, MIN, MAX, +, -, /, *, And Simple).

Routine Filter
Invert, Brightness, Contrast, Hue, Saturation, Blur, Noise Remove, Emboss, Engrave, Gamma R, Gamma G, Gamma B, Yellow, Magenta, Cyan, Mosaic, Smooth, Desaturation, Pseudo Color, Colorize, Oilify, Despeckle, Posterize.

Special Filter and Karnels
High Boost, High Spatial, Low Pass Spatial, Ranking (Max, Med, Min), Point detection, Line detection, Homogeneity

Edge Detection
Laplacing, Sobel, Krisch, Prewitt Gradient, Shift & Difference, Combine, Contrast Base, Quick, Range And Variance.

Morphometery

• Skeletonizing, Pruning, SKIZ, Histogram Equalization, Histogram Smoothing, Histogram Peak, Histogram Valley, Segmentation by Over/Under and Quantized, Contoring, Dilation / Erosion on Binary, Gray & colored Images, Opening/ Closing on Gray & Binary Images, Special Opening/Closing, Split/Combine of RGB, YUV, YIQ, XYZ, & HSL, Changing any Image to 1, 4, 8 & 24 bits, Medial Axis. Transformation, Halftone.
• Image Addition, Image Average, Image Subtraction, Image Multiplication.

Measurement

• Spatial calibration
• Line measurements for Distance, Length, Width, Perimeter, Angle, Three Point Radius.
• Area by enclosed line controlled by four arrow keys available on keyboard arrows with zoomed preview.

Introduction

BIOWIZARD is simple image analysis software for microscopy with an intuitive user interface and simple to use navigation with a suite of image processing techniques, measurements and enhancement tools that set it apart from other mainstream softwares.Such image processing softwares are now being extensively used in a number of diverse fields such a medicine, biological research, cancer research, drug testing etc.

View:

• Zoom in/out
• Zoomed preview
• Rotation at 90, 180,270 or custom
• Image flipping; horizontal or vertical axis
• Intensity histogram.
• Image Information
• Redo/Undo on all operations.
• Ruler in Various units.
• Slide show.

Image Processing:

• Background subtraction and contrast enhancement of color or monochrome images
• Arithmatic image functions (Boolean Math; Add, AND, OR, XOR, DIFF, MIN, MAX, +, -, /, *, And Simple).

Routine Filters:
Invert, Brightness, Contrast, Hue, Saturation, Blur, Noise Remove, Emboss, Engrave, Gamma R, Gamma G, Gamma B, Yellow, Magenta, Cyan, Mosaic, Smooth, Desaturation, Pseudo Color, Colorize, Oilify, Despeckle, Postarize.

Special Filters & Karnels:
High Boost, High Spatial, Low Pass Spatial, Ranking (Max, Med, Min), Point detection, Line detection, Homogeneity

Edge Detection:
Laplacing, Sobel, Kirsch, Prewitt Gradient, Shift & Difference, Combine, Contrast Base, Quick, Range And Variance.

Morphometery:
Skelotizing, Pruning, SKIZ, Histogram Equalization, Histogram Smoothing, Histogram Peak, Histogram Valley, Segmentation by Over/Under and Quantized, Contouring, Dilation / Erosion on Binary, Gray & colored Images, Opening/ Closing on Gray & Binary Images, Special Opening/Closing, Split/Combine Of RGB, YUV, YIQ, XYZ, & HSL, Changing any Image to 1, 4, 8 & 24 Bits, Medial Axis. Transformation, Halftone. Image Addition, Image Average, Image Subtraction, Image Multiplication.

Measurement

• Spartial calibration
• Line measurements for Distance, Length, Width, Perimeter, Angle, Three Point Radius.
• Area by enclosed line controlled by four arrow keys available on keyboard arrows with zoomed preview.

Count And Classification:
Identification of objects in an image, count them, obtain several features measurements. Objects identification by user or automatically. User defined classification on basis of size or intensity

Threshold Particle Measurement :
Manual, Auto bright and Auto dark methods to identity intensity range defined object to be measured. Various calculation & measurements available for selected Particle are; Dimensions, Area, Perimeter, Ferrite Length, Min/Max Radius, Thread Length, Thread Width, Fiber Length, Fiber Width.

Image Editing
1. Cut, Copy, and Paste.
2. Selected copy by free hand AOL controlled by four arrow keys available on keyboard or mouse with zoom preview.
3. Crop, duplicate, restore
4. Resize
5. Compression
6. Conversion to other format BMP, JPG, TIF, PNG, GIF & PSD
7. Flood fill or spray with selected color at selected portion.
8. Grid creation; 5X5, 10X10 & 100X100 grids (or cells).
9. Drawing tool curve, line, square, and circle with node control and provision to change color & thickness of the line.
10. Write text in any color or font.
11. Pointer to place on an object in either of four directions with provision to change its color & thickness.
12. Eraser works only on line, arrow or on any drawing tool.(not on original image)
13. Camera Lucida
14. Montage feature to merge stored image together. Useful to Merge different focuses of same image.
15. Image stitching.
16. Highlighter.
17. Pixel by Pixel Correction by key board.
18. Multiple image folder with Search facility.
19. Filter application on selected area.

View
1. Zoom in/out
2. Zoomed preview
3. Rotation at 90, 180,270 or custom
4. Image flipping; horizontal or vertical axis
5. Intensity histogram.
6. Image Information
7. Redo/Undo on all operations.

Image Processing
1. Background subtraction and contrast enhancement of color or grayscale images
2. Arithmatic image functions (Boolean Math; Add, AND, OR, XOR, DIFF, MIN, MAX, +, -, /, *, And Simple).

Routine Filters:
Invert, Brightness, Contrast, Hue, Saturation, Blur, Noise Remove, Emboss, Engrave, Gamma R, Gamma G, Gamma B, Yellow, Magenta, Cyan, Mosaic, Smooth, Desaturation, Pseudo Color, Colorize, Oilify, Despeckle, Posterize.

Special Filter and Karnels:
High Boost, High Spatial, Low Pass Spatial, Ranking (Max, Med, Min), Point detection, Line detection, Homogeneity

Locational

• Centroid X, Centroid Y, Major X1, Major Y1, Minor X1, Minor Y1, Major X2, Major Y, Major X2, Minor Y2, Box X1, Box X2, Box Y, Box Y2 & Box Area.

SG Iron Analysis

• The module automatically analyzed & calculate Nodulins/Non Nodulins percentage. Determine its class and number from 1 to 8 as per ASTM, JIS, BIS & ISO standard s, Nodules per square mm is also on Etched sample it reported.
• Determine percentage of pearlite, graphite, ferrite and carbide.

Report

• Three options: Direct printout with original image processed Image & Tabular results.
• Export to MS Office or Excel for further modification.