New Items

The use of microscopic image analysis system is the most reliable technique to characterize particle shape and to characterize a particle size and volume distribution. Tradition method, such as laser diffraction, although efficient, gives limited information on particle shape. The particle size, distribution and shape of the particles can effect bulk properties, product performance, process ability, stability and appearance of the end product in Pharma industry.

The software is useful to measure and analyse the particle size, particles shape, particle count, foreign particle detection, particle structure, homogeneity, surface, coatings thickness. For spherical particles (which are rarely uncounted in pharmaceutical powders) the diameters are sufficient to describe the particle size. For non- spherical particles, feret’s diameter, Particle orientation, Particle shape, elongation, convexity, circularity, circle equivalent diameter are measured.

This software is also useful to study the polarizing effects which study the cross section through pharmaceutical tablets by preparing thin-sections on slide with UV curing adhesive for final polishing. The cross section reveal the spatial distribution of components in the tablets so that any post compression change (eg polymorph conversions or change in the hydration state of components) can be investigated.

Grain Size

• ASTM E-112, E-930, E1181, ISO 643-03, JIS G 0551-05 BS 490 DIN 643-03, IS-4748-88, SIS 111101 GOST 5639-82. Determine feritic and austerritic grain size in steel. The available methods are: 1. Automatic lineal heyn intercept method.2. Jeffries planimetric method. 3. Automatic and Semiautomatic Snyder and graff open scale intercept method. 4. Comparison method. 5. ALA grain size. 6. Selected grain size. 7. Manual count etc.

Phase Segmentation

• Segmentation module in a sample measures the volume percentage of phases in a fully automatic way and is associated to a knew constitute of the specimen. Since a phase is detected and its area is estimated on the basis of its intensity/grayscale, an option for delineating phases from the histogram is also provided multiple phases are identified by colored overlays and can be simultaneously displayed for the same field of view. The area percentage data for each phase are displayed in class table. You can process and measures the unlimited number of images and all statistical data (area) will be accumulated in the class table.

Non-Metallic Graphite

• ASTM E-1245 E ASTM E45-97, ISO 4163-82, DIN 50602.Wizard determines contents of non metallic. Inclusion in rolled or forged steel products. According to ASTM, expression of results are in group A, b,C,D along with segmentation of thick/thin and its severity level.

Decarburization

• ASTM E1077, ISO 3887, JIS-0557-98 BS-6617,IS-7754 DIN 50192.Decarburization module intended to measure decarburized depth of steel due to heating at elevated temperatures during hot working or by detecting changes in the microstructure, hardness or carbon content at the surface. The decarburized depth is taken as the depth where a uniform microstructure, hardness or carbon content at the base material is observed. The microscope image analysis system is accurate for-as hot rolled, as forged, as annealed and as normalized sample. The software performs interactive measurement of complete, partial or total decarburization conforming to industry standards.

Lamellar Graphite

• Lamellar Graphite module is simple and straight forward. You need only to describe the sample and taken and the image of the sample rest is supported by powerful and complex image analysis algorithms. This modules evaluate and quantity in a fully automatic and consistent way FORM (Designated by roman no l to Val), size (Designated by Arabic no 1 to8) & type A to Either Graphite is determined at a magnification of 100 and recommended area size is 80mm.Result and images may be displayed and stored in either the industry standards Microsoft access database, where search facility can quickly find the results of a particular analysis using unique information such as customer, specimen type, data, operator etc.

Porosity ASTM 247

• Pores in casting are estimated and reported on the basis of intensity. The percentage is calculated.

Spheroidal Graphite

• Spheroidal Graphite (Nodules) in cast iron are analysed by identifying the appropriate industry standards. The software determines proportion of graphite of non-round shape, for instance vermicular graphite. Nodules for (designated by Arabic no 1to 8) is reported along with calculated Nodules/sqmm.Artifact can be recognized and ignored. Following graphite measurement and classification, the software presents the result in both graphical and statistical formats. The full morphological analysis raw data is also displayed. Result and images may be displayed and stored in either the industry standard Microsoft access database format, or in an integrated database along with unique information such as customer, specimen type, data, operator etc.

HDMI Camera

• 5.0MP Megapixel HDMI Camera
• 1/2 Inch Sensor Size
• 1920 X 1080 resolution @ 60 fps.
• Auto Exposure, Auto White Balance
• Memory Slot SD (upto 32 GB)

Zooming Range & Ratio

• Zoom 0.7X to 4.5X with magnification 6:5.1
• 0.5X C Mount adapter
• Magnification Range
• 0.7x to 4.5X.

Mechanical Body

• Pole stand with base.
• Lateral zoom control movement.
• Base size is 285mm X 238mm.

Epi - Illumination System

• Transmitted led ring light systems.
• Regulated with power supply and has separate
• brightness controls.

MODEL : CLASSIC PL

Trinocular Observation Head

·         Siedentopf observation head inclined at 30° rotatable at 360°.

·         Diopter adjustment ring on ocupar tube (±5).

·         Interpupillary distance from 48mm to 75mm.

 

Eyepiece ( Anti fungus)

Wide field eyepiece 10X (paired) F.O.V. 20mm.

Objectives (Infinity corrected)

·         Stain free Plan Achromatic 10X

·         Stain free Plan Achromatic 20X

·         Stain free Plan Achromatic 40X

·         Stain free Plan Achromatic 60X

 

Mechanical  Body

·         Co-axial focusing system. PRE-FOCUSING LEVER & TENSION ADJUSTMENT RING.

·         Reverse angle quadruple nosepiece revolves on ball bearing.

·         Reckless ceramic coated mechanical stage size 216mmX150mm. Having low positioned co-axial controls. Coarse stroke 37.7mm/rotation, fine division 0.002mm.

·         Cross travel 78 X 54mmmm.

 

Analyzer

Rotatable analyzer with gradation 0° - 360°.

Bertrand Lens

Bertrand lens, focus/ center adjustable sliding in/out of optical path.

 

Optical Compensator
Lambda Slip (First class red), ¼ lambda slip, Quartz wedge.

Revolving Round stage
Diameter ?? 160mm, graduated in 1° increments, minimum resolution 6’ when using vernier scale.

Polarizer

360° rotatable.

Sub stage Condenser
Strain free swing condenser N.A 0.9/1.25 with iris diagram and filter holder.

Illumination System

Transmitted illuminator 12V/20W Halogen lamp, brightness adjustable Epi - illuminator 12V/50W Halogen lamp, with iris aperture diaphragm and iris field diagram. Brightness adjustable.

Standard Accessories

Blue filter ,fuse, operating manual, vinyl Dust cover, guarantee card & Styrofoam molded pack.

LED adjustable light source for microscope has long lifetime 15W cold light fiber optic LED source Radiator and Cooling space allows no cooling off time after use Inside fan design design allows the illumination to work with low noise Double fiber,ring fiber and single fiber are optional.

• Packaging Details: Packing size : 285 mm x 230 mm x 255 mm

0.5 x Focusable Adapter For Microscope Camera .
*Weight : 100 grm 
If item comes under custom then we will not be responsible for any charges and buyer will have to pay duty we will accept return or refund request in this situation.Kindly contact us before buying item